Eap Security & Server Certificates - Overview - AMX Modero MVP-5150 Operation/Reference Manual

Protected Setup Pages
FIG. 58 Wireless Settings page - WPA-PSK Settings
WPA-PSK Settings
SSID (Service Set Identifier):
Password/Pass Phrase:
WPA-PSK Settings (Cont.)
Save/Cancel:
EAP Security & Server Certificates - Overview
The following EAP types all support a server certificate:
68
Enter a pass phrase with a minimum of 8 characters and a maximum of 63.
The exact same pass phrase (including capitalization) must be entered in the access point.
Opens an on-screen keyboard to enter the SSID name used on the target
WAP. The SSID is a unique name used by the WAP, and is assigned to all
panels on that network. An SSID is required by the WAP before the panel is
permitted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• NXA-WAP250Gs use AMX as their default SSID.
• If this field is left blank, the panel will attempt to connect to the first available
WAP.
Opens an on-screen keyboard to enter a passphrase (password).
• This alpha-numeric string must use a minimum of 8 characters and a
maximum of 63.
• The exact pass phrase string (including capitalization) must be entered on
the target WAP.
• Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.
Refer to the Configuring Wireless Network Access (MVP-5150 Only) section on page 23 for
details on these security options.
Refer to the Using the Site Survey tool section on page 26 for more information on using this
tool.
EAP-PEAP
EAP-TTLS
EAP-TLS
MVP-5100/5150 Modero Viewpoint Touch Panels