Sound; About Your Phone - Sharp ONE User Manual

SOUND

Control the sound volume or switch your sound profile by pressing the VOLUME
Control which sounds play on your phone from the
Vibrate Turn this setting
signaling a call or new message. If you have ringer, voicemail, or messages set to
No
Ringer To set the default sound for an incoming call, tap
Sound selector.
Note: If you've assigned a specific sound to a contact, that sound will play rather
than the default sound you choose in Sound settings.
Voicemail To set the sound for a new voicemail, tap
selector.
Messages To set the ringtone for a new text or MMS message, tap Messages and choose from
the Sound selector.
System sounds Turn this setting
• Touch and hold an item to drag into the Spot - Makes a single water drop sound
• Drag an item into the Spot - Makes a plunking sound when item lands in the
• Lock your screen - Makes two knocking sounds when locked.
• Unlock your screen - Makes a swishing sound when unlocked.
• Dial phone numbers using the Dialer - Makes touch-tone DTMF sounds as you
• Attach/remove phone to USB charger or USB cable connected to computer -

ABOUT YOUR PHONE

You can view the following information about your phone and more from the
phone screen:
• Your phone number
• Version numbers of phone components
35
on to have your phone vibrate as well as play a sound when
sound, then your phone won't vibrate even when this setting is on.
on to hear a sound when you:
when item "lifts".
Spot.
touch each number.
Plays four ascending notes when attached; plays four descending notes when
removed.
Settings > Sound screen:
Ringer
Voicemail and choose from the Sound
ONE User Guide - R1.0 - April 22, 2010
+ or - buttons.
and choose from the
Settings About your
>