Sound; Call Settings - Sharp HRO00058 User Manual

Note
• Display Saving does not work whilst you are calling,
using WAP, or using an application.
• To cancel the Display Saving: The display saving
continues until either a key is pressed or there is an
incoming alert. The first key press only cancels this
function. You must press another key in order to input
any numerical or text value.
Setting the External Display
To Select the Backlight Time Out
You can select the backlight time out for the external
display.
→
"Settings" "Display"
"Backlight"
1.
Select the desired time.
Select "Off" to turn it off.
To Adjust the Contrast
You can adjust the LCD contrast of the external display
between 9 levels.
→
"Settings" "Display"
"LCD Contrast"
Adjust the contrast by pressing a (High) and b
1.
(Low) for maximum clarity.
Press e.
2.
(M 9-3-2)
→
"External Display"
→
"External Display"
Display Setting Reset
The display settings can be reset to their default settings.
→
"Settings"
1.
Enter your handset code.
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 122.
(M 9-4)

Sound

You can use this menu to check or edit the current
Profiles settings.

Call Settings

→
Set various types of functions and services.
Diverts
(M 9-5-1)
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
→
(M 9-3-3)
→
"Display" "Set to Default"
(M 9-5)
Settings 111