Sound & Display - Sharp LYNX 3D SH-03C Docomo Instruction Manual

Sound & display
Set ring tone, operation sound, screen
display, etc.
1
In the home screen,
[Settings]/[Sound & display]
2
Select an item
Manner mode: Set to avoid disturbing others
when in public.
･ Alternatively, in the home screen, H (for
at least 1 second)/[Manner mode].
Incoming voice
receiving.
･ You can also change the volume of
incoming voice call by pressing x/y. You
can also set Manner mode.
Reminder settings: Set an action for
receiving notification.
Media volume: Set the volume of media play
sound.
Phone vibe: Set whether to enable the
vibrator for receiving a call.
Pulse notification
lamp for receiving a notification.
Audible touch
dial sound.
Audible selection: Set whether to enable
operation sound for selecting items.
Haptic feedback: Set whether to enable the
vibrator for specific key operation.
microSD notifications: Set whether to enable
operation sound for performing Unmount
microSD or microSD Card being broken.
Earphone type: Set the type of connected
earphone.
Wallpaper: Set an image of wall screen.
62
Various Settings
z/
call: Set an action for
light: Set whether to flash a
tones: Set whether to enable
Incoming call screen: Set the screen for
receiving.
Orientation: Set whether to automatically
switch the vertical/ horizontal view according
to the direction of the FOMA terminal.
Animation: Express screen switch with
animation.
Brightness: Set the brightness of backlight.
Screen light on time: Set the light duration of
backlight.
Veil view: Prevent others from seeing
display.
Text font: Set the text font.
3D parallax: Set the 3D parallax.
Note that if the vibrator is set to be enabled and
the FOMA terminal is left on a table, it may fall
due to vibration.
[Manner mode]
The following is not silenced even while Manner
mode is set.
Shutter sound of camera
Record start/end sound of camera
Start/end sound of voice recorder