Arts (Auto Range Transpond System); Dtmf Paging System; Caller Id Display - Vertex Standard VX-7200 Operating Manual

ARTS (Auto Range Transpond System)

This system is designed to inform you when you and another ARTS-equipped station
are within communication range.
During ARTS operation, when the radio receives an incoming ARTS signal, a short
beep will sound, and "In" ("In Service") will be displayed on the sub-LCD. If you
move out of range for more than two minutes, your radio senses that no signal has
been received; a short triple-beep will sound, and "Out" ("Out of Service") will be
displayed on the Sub-LCD. If you subsequently move back into communication range,
as soon as the other station transmits, a short beep will sound and "In" will be dis-
played again on the Sub-LCD.

DTMF Paging System

This system allows paging and selective calling, using DTMF tone sequences.
When your radio is paged by a station bearing a tone sequence which matches yours,
your radio's squelch will open and the alert will sound. The three-digit code of the
station which paged you will be displayed on your radio's LCD.
RSSI Beep
This feature allows you to inform the Receiving Signal Level while operating on the
APCO Project 25 Digital System.
When the Receiving Signal Level is weaken, the alert will sound every one second.
When the Receiving Signal Level is weaken still more, the alert will sound every
1/2 second.

Caller ID Display

This feature is available on the APCO Projet25 Digital System.
The Caller ID will appear on the LCD display when receiving Unit to Unit call (Paging).
Caller ID: Tag information will appear when receiving the Source ID which listed
at the Destination ID table on your radio, otherwise received Source
ID will appear.
14
( Tentative )
A O
DVANCED
VX-7200 S
PERATION
O
ERIES PERATING
M
ANUAL