Vertex Standard VX-7200 Operating Manual page 14

C U /D
ODE P OWN
Press the assigned programmable key to select a 2-Tone encode code from pre-de-
fined encode list.
C S
ODE ET
Press the assigned programmable key to change the 2-Tone encoding digit. To change
the tones, select the desired digit using the [ P1 ] / [ P2 ] keys, then change the number
using the [ ] / [ ] keys.
S D
PEED IAL
Your Dealer may have pre-programmed Auto-Dial telephone number memories into
your radio.
To dial a number, press the assigned programmable key, then press the microphone's
numbered key corresponding to the Auto-Dial memory number list provided by your
Dealer. The DTMF tones sent during the dialing sequence will be heard in the speaker.
H C
OME HANNEL
Press the assigned programmable key to recall the pre-defined Home group/channel.
When you recall the Home group/channel, the " - H - " icon will appear on the LCD.
S T
ELECTABLE ONE
Press the assigned programmable key to select a sub-audible tone (CTCSS/DCS)
from the pre-defined tone table. You can operate the indicated sub-audible tone in
Selectable Tone mode.
H A
ORN LERT
Press the assigned programmable key to turn the Horn Alert function "ON" or "OFF."
If you receive a call from the base station with 2-Tone or DTMF signaling, horn alert
will be activated and your vehicles horn will sound.
When you turn the Horn Alert "ON," a tone will sound and the "
will appear on the display.
P A
UBLIC DDRESS
Press the assigned programmable key to use the transceiver as a PA amplifier. When
you enable this function, a tone sounds and "Public ADRS" will appear on the dis-
play. The public address can be used even while scanning and receiving a call.
12
( Tentative )
A
DVANCED
HOME
O
PERATION
VX-7200 S
ERIES
" icon appears
O M
PERATING ANUAL