Vertex Standard VX-7200 Operating Manual page 15

EXT. ACC1
Press the assigned programmable key to toggle output port on "1" "on" and "off."
EXT. ACC2
Press the assigned programmable key to toggle output port on "2" "on" and "off."
D CH#1
IRECT TO
Press the assigned programmable key to recall the Dealer pre-programmed channel
directly.
AF M V
IN R
Press the assigned programmable key to reduce the audio output to the (lower) level
programmed by your Dealer.
SET
Press the assigned programmable key to activate the "User Set" (Menu) Mode.
I C
NDIVIDUAL ALL
Press the assigned programmable key to enable the Individual Calling on the APCO
Project 25 Digital System.
To return to the Group Calling on the APCO Project 25, press the [ A ] key.
TX M
ODE
Press the assigned programmable key to select the TX mode. Available selections
are:
TX Mixed:
TX Digital: The VX-7200 transmits in the Digital Mode.
TX Analog: The VX-7200 transmits in the Analog Mode.
VX-7200 S
ERIES
( Tentative )
A
DVANCED
D CH#4
IRECT
The VX-7200 transmits in the Analog Mode, when after
receiving the analog signal. Meanwhile, the VX-7200
transmits in the Digital Mode, when after receiving the
digital signal.
O M
PERATING ANUAL
O
PERATION
13