Using The Audit Tab; Accessing The Audit Tab - EEye Digital Security Retina User Manual

Using the Audit Tab

Using the Audit Tab
The Audit tab is an option you can select to scan for all known open ports and services on the specified target IP
address(es). You can then use the scan results to complete a network audit. Based on its findings, the scanner
module searches available services or open ports for security vulnerabilities. The scanner module also has a feature
that determines if a protocol running on a port uses protocol detection.
The main window of the Audit tab is divided into three panes:
1. The Actions pane, where you set targets, ports and audits; determine options and start or schedule scan jobs.
2. The Scan Jobs pane, where you determine the status of scan jobs; view completed jobs; view scheduled jobs;
control active jobs; and delete or view completed jobs. To learn more about the Scan Jobs pane, see Using the
Scan Jobs Pane on page 51.
3. The Scanned IPs pane, where the devices and information found during an audit scan are listed.

Accessing the Audit Tab

Complete the following step to access the Audit tab:
1. Click the Audit tab (unless it is already selected) from the Retina interface.
2. The following example shows the Audit tab of the Retina Interface.
The Audit Tasks shortcut bar displays the following commands that you can select. Unavailable menu options appear
dimmed.
Retina Users Manual
32