Creating A New Address Group From Scan Results - EEye Digital Security Retina User Manual

Using the Discover Tab
8. Complete the following optional steps when needed:
• Click Pause Discovery Scan on the Discovery Tasks shortcut bar or the Pause button if you want to pause
the scan and the display results.
• Click the Abort button to prevent Retina from displaying additional information.
• You can also select Abort Discovery Scan from the Discovery Tasks shortcut bar.
9. Review your scan data as needed.

Creating a New Address Group from Scan Results

IP address groups are sets of addresses that you can create, modify, and audit. The group itself can contain any
combination of IP addresses. or example, you can create a group that lists only your organization's 2000 servers.
Complete the following steps to create an address group.
After completing the discover scan, the list box on the Discover tab will be populated with the devices discovered on
the network. The following steps refer to that list box.
1. Click the IP addresses you want to include in your new address group from the scan results listed in the Results
table.
To select consecutive IP addresses, hold down the Shift key and click the IPs you want to include. To select non-
consecutive entries, hold down the Ctrl key and click the IPs you want to include.
2. Click Add to Address Group from the Discovery Tasks shortcut bar.
The Add to Address Group dialog box appears.
Retina Users Manual
28