Appending To An Existing Address Group - EEye Digital Security Retina User Manual

Using the Discover Tab
3. Click the Create a New Address Group radio button.
4. Enter a name for your new address group in the provided field.
For example, if you are creating an address group for a group of servers, enter a descriptive name such as XP
Servers, as shown in the example below.
5. Click OK.
Retina saves your new address group.
6. When you want to view the list of IP addresses for the new group you created, click the Audit tab and click
Modify Address Groups.

Appending to an Existing Address Group

You can add one or more IP addresses to an existing address group.
For example, if there is a new Windows 2000 server on your network, you can add the corresponding IP address to
the Windows 2000 address group. Also, if there is an IP address you forgot to add when you created the address
group, you can append it to the group at any time.
Complete the following steps to append to an existing address group:
1. Click the IP address(es) you want to include in the existing address group from the scan results listed in the
Results table.
2. Click Add to Address Group from the Discovery Tasks shortcut bar.
The Add to Address Group dialog box appears.
Retina Users Manual
29