Rear Panel - Phonic AM440 User Manual

5. Phones
This stereo output port is suited for use with head-
phones, allowing monitoring of the mix. The audio
level of this output is controlled using the Phones /
Submix control.
6. Main L and R Outputs
These two ports will output the final stereo balanced
line level signal sent from the main mixing bus. The
primary purpose of these jacks is to send the main
output to external devices, which may include power
amplifiers (and in-turn, a pair of speakers), other mix-
ers, as well as a wide range of other possible signal
processors (Equalizers, Crossovers, etcetera).
7. Control Room Outputs
These two /4" Phone Jack outputs feed the signal
altered by the Control Room/Phones level control on
the face of the mixer. This output has extensive use,
as it can be used to feed the signal from the mixer to
an active monitor, for the monitoring of the audio sig-
nal from within a booth, among other possible uses.
4 5

AM440/440D
6 7
8. Record Out
These outputs will accommodate RCA cables, able
to be fed to a variety of recording devices. such as
MD players, and even laptop computers, ensuring
total control over recording quality.
9. 2T Return
These RCA stereo inputs are used to connect the
mixer with external devices, such as tape and CD
players, or even Laptop computers, receiving a sig-
nal from another source and feeding it to the Main
L-R mixing bus.

Rear Panel

10. Power Connector
This port is for the addition of a power cable and
supply, allowing power to be supplied to the mixer.
Please use the power adaptor that is included with
this mixer only.
8

7