System Information - Gigabyte GA-C1037UN-LA User Manual

& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/Dram Voltage/+5V/+12V/CPU VTT
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speed.
& System Fan Speed Control
Allows you to determine whether to enable the system fan speed control function and adjust the fan speed.
Allows the system fan to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Allows the system fan to run at slow speeds.
Silent
Allows you to control the system fan speed under the Slope PWM item.
Manual
Allows the system fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when System Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
2-3

System Information

This section provides information on your motherboard model and BIOS version. You can also select the default
language used by the BIOS and manually set the system time.
& System Language
Selects the default language used by the BIOS.
& System Date
Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to switch
between the Month, Date, and Year fields and use the <Page Up> or <Page Down> key to set the desired
value.
C ~ 2.50 PWM value / C.
o o
- 19 -