Cleaning The Thermostat; Switch Settings - Tekmar TekmarNet2 Thermostat 527 Installation & Operation Manual

Cleaning the Thermostat

The thermostats's exterior can be cleaned using a damp cloth. Moisten the cloth
with water and wring out prior to wiping the control. Do not use solvents or cleaning
solutions.

Switch Settings

Switches are set to "On"
position from the factory, and
do not require changing for
most applications.
Switch Position Action
ON
1
OFF
ON
2
OFF
ON
3
OFF
ON
4
OFF
© 2010 D 527 - 08/10
For instructions see brochure
Use at least 65°C conductors
tN2
SETBACK
The thermostat follows a programmable setback schedule
as a schedule member if available. Requires the installation
of a Timer 033 to use this feature.
OFF
The thermostat does not follow a programmable setback
schedule.
SCENE
The thermostat responds to changes in the scene (system
wide manual overrides). Requires the installation of a User
Switch 479 to use this feature.
OFF
The thermostat does not respond to scenes.
NONE
The thermostat is not part of a cooling group.
COOL MEMBER 1
The thermostat joins as a member to cooling group 1.
LOCK ACCESS LEVEL
Locked to 'User' access level. Set to Lock when installation
completed.
UNLOCK ACCESS LEVEL
Unlock to allow 'User' and "Installer' access level. Set to
Unlock during installation process.
tekmarNet ® reset control must also be set to Unlocked
(Installer access level).
tNt 527
One Stage Heat
Made in
Canada
tN2
1 2
6 of 20
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4