Table Of Contents; Getting Started; Installation; Caution - Tekmar TekmarNet2 Thermostat 527 Installation & Operation Manual

Table of Contents

Getting Started ..............................2
Installation .........................................2
Caution ..........................................2
Preparation ....................................2
Removing The Thermostat Base ...3
Mounting The Thermostat Base ....3
Thermostat Wiring .........................4
Testing the Thermostat Wiring ......5
Mounting the Thermostat ..............5
Cleaning the Thermostat ...............6
Switch Settings ..................................6
User Interface ....................................7
Display...........................................7
Button Operation ...........................7

Getting Started

Congratulations on the purchase of your new tekmar thermostat.
This manual will step through the complete installation, programming and sequence
of operation for this control. At the back, there are tips for control and system
troubleshooting.

Installation

Caution

Improper installation and operation of this control could result in damage to the
equipment and possibly even personal injury or death. It is your responsibility
to ensure that this control is safely installed according to all applicable codes and
standards. This electronic control is not intended for use as a primary limit control.
Other controls that are intended and certified as safety limits must be placed into
the control circuit.

Preparation

Tools Required
• tekmar or jeweller screwdriver
• Phillips head screwdriver
Materials Required
• 2, #6 x 1" Wood Screws
• 18 AWG LVT Solid Wire
© 2010 D 527 - 08/10
-- ---- - ---- ---- --- -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - --- - - ---- ---- --- --- - - - - - - - - - - - - - - - - -- - - - -- - -- -- - -- -- -
---- ---- --- ---- -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ---- - -- --- --- --- - - - - - - - - - - - - -- - - - - -- -- - -- -- - -- - -- -
Symbols Description .....................7
Settings .................................... 8-11
Sequence of Operation .................... 12
Heating Operation ....................... 12
Cooling Group Operation ............ 13
Schedules ................................... 14
Scenes (System Override) .......... 14
Troubleshooting ............................... 15
Error Messages ...................... 15-17
Frequently Asked Questions ....... 18
Job Record .................................. 19
Technical Data ............................. 19
Limited Warranty and Product
Return Procedure ........................20
• Wire Stripper
• Optional Adapter Plate 007 (for
installation on 2" x 4" gang box)
2 of 20