Trane ComfortLink II XL950 Control User Manual page 22

7.6 Host Settings
This screen is used to manage how the control obtains network addresses and is needed when DHCP (Dynamic Host Configuration Protocol) has
been turned off or is not available on the router. Otherwise, you may use DHCP to automatically obtain this information. This manual configuration is
required if a static IP address is desired.
NOTE: No additional configuration may be required in a non-broadcast network where IP addresses are assigned by DHCP. You may connect to the
network without modifying the Host Settings.
1) Select the "Host Settings" button to access
the second screen of settings in this Ad-
vanced Network Settings menu.
4) To manually select a DNS server, enter IP
address(es).
22
2) Select IP Address, Gateway and Subnet
Mask buttons as required.
5) After all the addresses are assigned, Con-
nect to the network.
3) Enter the IP address as required for each.
6) To change a Static IP Address to a DHCP Ad-
dress, press "Release and Renew IP Address".