Jenn-Air FREESTANDING OUTDOOR GRILLS Installation Instructions Manual page 9

5. Place warming shelf on brackets as shown.
A
A. Warming shelf brackets
B. Warming shelf
Attach Right Side Shelf
1. Unpack side shelf.
2. Loosen the 2 screws on the side panel and align the bottom
keyhole slots on the side shelf with the loosened screws.
Hook the side shelf onto the two loosened screws and let the
shelf slide down so the screws are in the narrow neck of the
slots.
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the two screws to hold the
weight of the side shelf.
3. Attach the top of the side shelf to the grill (A) by inserting
three screws into the side shelf from inside the grill hood and
tighten.
4. Attach the bottom of the side shelf to the side panel (B) of the
grill by tightening the two screws inserted in the keyhole slots
in Step 2.
B
A
5. Attach the side shelf to the control panel (C) by tightening the
screw from the side shelf control panel to the main control
panel.
A
C
6. Attach side shelf push bar by aligning the screw holes on the
side shelf with the screw holes in the push bar. Insert the
screws into the push bar screw holes and then into the side
shelf and tighten.
B
9