Samsung HG28EC675 Installation Manual page 36

¦ Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and
Picture mode Setup when the TV starts for the first time.
– Hotel Plug & Play is only available when the power is turned ON for the first time.
– After setting up the TV first and running Clone TV to USB.
– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
Setup > Start
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change Skip
E
Easy Set up
Interactive
c
(Hotel Menu)
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If Standalone Plug
E
& Play is selected
Select your Language
Select your language to start the on screen setup.
English
Eesti
Suomi
Francais
Deutsch
The Language Setting will be applied to Main Menu and not Plug and Play.
When pressing OK
Hospitality Mode
button, the hotel
SI Vendor
menu appears as
Power On
Channel
shown on the left.
Menu OSD
Complete the hotel
Clock
menu settings,
Music Mode
and then reset the
Remote Jack Pack
TV. You can use
External Source
your TV. Bathroom Speaker
Eco Solution
(HC470 not support
bathroom speaker)
Logo/Message
Cloning
REACH Server
Security
* It may differ depending on
the model.
TV Setup Complete!
Your TV is now ready to use
OK
36
English
EU_Install Guide_ENG.indd 36
Select your information in the
categories below.
Country
Picture Mode
<Depending on the Region, this
step may not exist.>
If you select this, the
After selecting the country in the country
setup process will be
completed and go to
menu, some models may proceed with an
hotel menu.
additional option to setup the pin number.
If you forget the PIN code, select the
Service → TV Reset. in the Hotel menu.
HG**EC670
E
HG**AC670
E
HG**EC470
HG**AC470
HG**EC770
then select Scan.
Aerial
Press the ▲▼◄►
Channel Type
buttons to move the
highlight.
Press the enter button
to select.
Standalone System
OFF
Auto Tuning Complete.
Digital
* TV
* Radio
* Data/Other
Analogue
E
You can adjust your time to set DST, Time Zone
and clock mode.
Clock Mode
E
Date
Time
Time Zone
DST
Standalone mode is set.
Configure your TV
Select the country that
you're in now.
Bulgaria
E
Standard
HG**EC675
Auto Tuning
Select the connected aerial
that you wand to use to get
channels
Air
Digital & Analogue
Scan
E
Auto Tuning
2
2
0
0
Change Settings Scan Again
E
* It may differ depending on
the model.
Clock
Set current date and time.
Auto
E
--/--/----
--:--
Auto
Off
-- : --
The TV will enter RF mode.
Auto Tuning
Select the
then select Scan. connected aerial
that you wand to use to
get channels.
Aerial Air
Channel Type Digital & Analogue
Scan
After Searching the
E
channels.
Auto Tuning
Auto Tuning Complete.
All 2
Do you want to scan for satellite channels?
* TV 2
If the aerial cable has been connected to your TV,
* Radio 0
select Yes to scan.
* Data/Other 0
Yes No
Analogue 0
E
Change Settings Scan Again
E
Auto Tuning
Select the
below then select Scan. connected aerial
that you wand to use to
get channels.
Aerial Satellite
Channel Type All
E
Satellite Selection Astra 19.2E
LNB Settings Change Options
Scan
E
Auto Tuning
Auto Tuning is finding channels for you...
Astra 19.2E 10935 MHz (V/R)
12%
All 0
0
TV
0
Radio
0
Data/Other
Stop
E
Auto Tuning
Auto Tuning Complete.
0
All
TV 0
0
Radio
0
Data/Other
0
Astra 19.2E
TV 0
Radio 0
0
Data/Other
Change Settings Scan Again
2014-04-14 10:22:43