Samsung HG28EC675 Installation Manual page 15

✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎ When connecting an external device, match the colour of the connection terminal to the cable.
DATA
1
– Used to support data communication between the TV and the SBB.
– Connects using RJ-12 TV type plugs.
2 CLOCK: Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock
Display function.
HEADPHONE JACK: Headphones may be connected to the headphone jack on your TV. While the headphones are
3
connected, the sound from the built-in speakers is disabled.
4 HP-ID: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone
Box. See page 15. When connecting Headphone to Headphone Box, it works same as Headphone function.
5 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to
additional modules to improve device use and convenience.
AV IN / COMPONENT IN
6
– Connects the Component video / audio.
– Connect the component video cables (optional) to the component jacks ("PR", "PB", "Y") at the back of your TV
and the other ends to the corresponding component video out jacks on the DVD.
– If you wish to connect both the Set-Top Box and the DVD player, you should connect the Set-Top Box to the DVD
Player and connect the DVD Player to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and
Cr.
– Connect the RCA audio cables (optional) to [R - AUDIO - L] at the back of the TV set and the other ends to the
corresponding audio out jacks on the DVD Player.
EU_Install Guide_ENG.indd 15
5 RJP
VARIABLE
9
AUDIO OUT
0
VOL-CTRL
USB
# (5V 0.5A)
/CLONING
HDMI IN
@
3 (DVI)
HDMI IN
2 (ARC)
HDMI IN 1
PC/DVI
7
AUDIO IN
3
4 $ 8 6 1
<HC770>
15
English
2014-04-14 10:22:39
#
5
6