Table of Contents
Advertisement
Quick Links
Version 0.1
FEATURES AND SPECIFICATIONS
LEDS: 54 Three Watt LEDs (36 White, 18 Amber)
Beam angle: 25 º
Control system: DMX-512 + Stand Alone
DMX channels: 4
DMX connectors: 3 pin XLR
Voltage: 100 - 240 VAC 50/60Hz
Max power consumption: 185 Watts
Size: 11 1/4"W x 11 1/2"H x 13"D
Body material: Cast Aluminum
Body color: Black
Weight: 17.2 lbs
DESCRIPTION
The FXLD354WAO is a PAR Style white/amber LED
lighting fixture. It is suitable for stage, disco, night
club, and other artistic applications.
stand alone control modes and can operate via a DMX-
512 external signal.
A double yoke enables the fixture to be operated in
several positions.
INSTALLATION
LOCATION
The FXLD354WAO is rated IP65 and can be use
outdoors
.
www.lightronics.com
Lightronics Inc.
FXLD354WAO LED FIXTURE
OWNERS MANUAL
It has several
Locate the unit in a well ventilated area away from
heat. Holes are provided on the yokes to install a
lighting bar pipe clamp. Use a safety cable.
POWER CONNECTIONS
The FXLD354WAO has a line cord for connection to a
120 VAC, 15 Amp, 60Hz, grounded service. A pass
thru power cable is also included.
You are limited to 6 fixtures when chaining power
using the pass thru cables.
The safety ground pin on the power cord must be used.
DMX CONNECTIONS
A system using DMX control should be connected as a
chain of devices. In other words the control signal
cable should proceed from the controller to the first
receiving device and then to others in a continuous
"daisy chain" fashion.
The fixture has a DMX IN and a DMX OUT connector
to be used to connect the chain. The cable should NOT
be split into a star arrangement with a cable running
from the controller directly to each fixture.
509 Central Drive Virginia Beach, Va 234354
DANGER
RISK OF ELECTRIC SHOCK
RISK OF FIRE
Page 1 of 6
05/07/2012
757 486 3588
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lightronics FXLD354WAO
Summary of Contents for Lightronics FXLD354WAO
- Page 1 Use a safety cable. INSTALLATION POWER CONNECTIONS LOCATION The FXLD354WAO has a line cord for connection to a 120 VAC, 15 Amp, 60Hz, grounded service. A pass thru power cable is also included. You are limited to 6 fixtures when chaining power using the pass thru cables.
- Page 2 Some units use 3 pin connectors. Others use 5 pin White #1 Level, White #2 Level, Flash, Fade, Auto connectors. The FXLD354WAO receives a DMX Sequence, Sound Color, and Sound Flash. signal on the 3 pin MALE connector on one side of the DMX OPERATION unit.
- Page 3 A mild detergent can be used sparingly if needed. Ensure that the unit is completely dry before re-use. REPAIR The FXLD354WAO does not contain parts which are serviceable by the user. Internal service on the unit by other than Lightronics authorized agents will void the warranty.
- Page 4 Page 4 of 6 FXLD354WAO LED FIXTURE Version 0.1 OWNERS MANUAL 05/07/2012 MENU NAVIGATION www.lightronics.com Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588...
- Page 5 Page 5 of 6 FXLD354WAO LED FIXTURE Version 0.1 OWNERS MANUAL 05/07/2012 DMX VALUES AND FUNCTIONS FUNCTION CHANNEL VALUE 0 - 127 Master Dimmer for CH 2 - 4 128 - 249 Strobe Master for CH 2 - 4 250 - 255...
- Page 6 H) This warranty does not cover the cost of shipping products to or from Lightronics for service. I) Lightronics Inc. reserves the right to make changes as deemed necessary to this warranty without prior notification.
Need help?
Do you have a question about the FXLD354WAO and is the answer not in the manual?
Questions and answers