Finishing Your Installation - Fagor 6HA-200 TLX Installation Use & Care Instructions

• Never use reductions, shunts, or adaptors as they can cause overheating or
burning. If their use cannot be avoided, remember to use only single or multiple
adapters and extensions which comply with current safety regulations. In
these cases, never exceed the maximum current capacity indicated on the
single adapter or extension and the maximum power indicated on the
multiple adapter.
The manufacturer is not liable for any direct or indirect damage caused by faulty
installation or connection. We recommend that all installation and connection
operations be completed by qualifi ed personnel complying with the local and
local regulation codes.
CAUTION
Connect the black wire to the N (neutral) tab; connect the red wire to the L (live) tab
and the green or green/yellow wire to the ground tab. Do not swap connections.
Model
6HA-200 TLX
6HA-200 TR X
2.4

FINISHING YOUR INSTALLATION

FINAL PREPARATION
All exterior steel body parts should be cleaned with warm, soapy water and with
a liquid stainless steel cleaner.
If any staining or grease build-up occurs, do not use abrasive cleaners, powder
cleaners, steel wool or other abrasive cloths. When removing hard stains from the
stainless steel unit, we recommend that you soak the area with hot, wet cloths
to loosen the substance on the unit. After the stain has been suffi ciently soaked,
use a normal wood or nylon scraper to remove the stain. Never use a metal knife,
spatula, or any other metal tool to scrape stains off of the stainless steel unit.
Scratches are impossible to remove.
Before using the oven for the fi rst time, wash the oven cavity thoroughly with
a warm soap and water solution to remove any impurities left over from the
installation process, then wipe dry.
ELECTRICAL SPECIFICATIONS
Volts
240
240
12
Watts
3.2 kW
3.2 kW
Amps
15
15