User Manual of Day/Night High‐definition dome Camera
21
:
Note
Under auto mode, the camera will switch between DAY and NIGHT automatically, the delay time is
0‐63. The value 36 in DELAY option means the conversion time is 36 seconds between DAY mode and
NIGHT mode. DAY→NIGHT: the lager the threshold value is, the lower the brightness is. NIGHT→DAY: the
delay time and threshold value are alike to DAY→NIGHT.
Select "NIGHT" and press confirm button to enter the submenu to set the parameters.
3.2.6 Shutter Settings
Press up/down to move cursor to "SHUTTER".
Press confirm button to select shutter speed: AUTO, ×2, ×4, ×8, ×16, ×32, ×64, ×128,
× 256, 1/100000, 1/10000, 1/5000, 1/2000, 1/1000, 1/500, 1/250, FLK, 1/50.
Note: FLK means "Flickerless". It is used to eliminate the image flicker when the PAL system camera in 60Hz
illuminant or the NTSC system camera in 50Hz illuminant.
3.2.7 AGC Settings
"AGC" includes OFF, LOW, MIDDLE and HIGH. Press left/right to select desired mode.
Note : If the DAY/NIGHT mode is auto, there are only LOW, MIDDLE and HIGH selectable.
3.2.8 Synchronization
Internal and power synchronization are both available. When using DC12V power supply, it displays internal
synchronization and is not adjustable. When using AC24V, user can select either internal or power
synchronization.
3.2.9 Language
English is the default language.
3.2.10 Special Function
Move cursor to "SPECIAL" , press confirm button and the menu will be displayed on the screen.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.