Table of Contents
Advertisement
User Manual of Day/Night High‐definition dome Camera
3. Attach the flush mounting base to the gang box with screws.
4. Attach the dome drive to the base and use screws to fix it. Adjust the lens to a surveillance area as
needed and get clear image. Fix the lock screw into the lens then.
At last, install the lower domes back to the dome drive.
5.
2.3 In ceiling mounting without gang box
Note:
Please ensure that the wall is strong enough to withstand three times weight of the camera and then
install the camera securely. If the wall is not strong enough, the camera may fall and cause serious damage.
1. Rotate the lower dome anticlockwise to take it down. Then, take down the inner black lower dome.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 2.2.3 Attach the base to gang box
Figure 2.2.4 Install dome drive and adjust lens
Figure 2.2.5 Finish the installation
Gang Box
Ceiling
Flush Mounting Base
13
Advertisement
Table of Contents
