Configuring And Commissioning; Configuring Ethernet And Ip; Ethernet And Ip Settings Page - Weidmuller SL-MOD-GW User Manual

Serial number
The serial number of the SL-MOD-GW. The serial number is specific to your device.

5.3 Configuring and commissioning

The configuration pages are accessed by clicking on the Configuration... menu entry on the menu bar which
then expands a configuration sub-menu. All configuration settings are kept in the device' non-volatile memory.
Note
If you make changes to any settings, remember to save each page before changing to a
different page!

5.3.1 Configuring Ethernet and IP

Select the Configuration→Ethernet & IP sub-menu from the menu bar to open the Ethernet and
IP settings which are shown below:
Illustration 5.5: Ethernet and IP settings page
The following Ethernet parameters are shown:
MAC address
The device' unique MAC address. This number is hard coded and cannot be changed.
The following Internet protocol (IP) settings can be entered:
IP address
The IP address assigned to this device.
Subnet mask (also known as indexterm2:[network mask])
If you have a router, enter the subnet mask for the segment to which this device is attached.
Gateway address
If your network segment has a router, enter its IP address here. Otherwise leave the address as 0.0.0.0.
UMSLMODGW-1006 19