Temporarily Changing The Ip Settings On Your Pc - Weidmuller SL-MOD-GW User Manual

9. Type SETIP, then press Enter within 10 seconds after the prompt is shown:
DIAG MODE
Ver: x.y
S/N: 1234
MAC: 00:50:C7:67:71:97
IP Address: 192.168.1.130
Subnet Mask: 255.255.255.0
Gateway Address: 0.0.0.0
>SETIP
IP Address (192.168.1.130): 10.0.0.100
Subnet Mask (255.255.255.0): 255.255.255.0
Gateway Address (0.0.0.0): 0.0.0.0
RUN MODE
10. The device will show current values and prompt for new values for IP address, net mask and gateway
address. Enter the new values and press Enter. A key press must be received at least every 10 seconds
otherwise the device will go back to RUN MODE and resume normal operation.
11. The gateway will return to the main prompt. Type X and press Enter to leave DIAG MODE and resume
normal operation indicated with RUN MODE.

4.2 Temporarily changing the IP settings on your PC

This method involves manually assigning an IP address to your PC in the same subnet as the gateway. The
default subnet of the gateway is 192.168.1.0/8.
1. Connect the SL-MOD-GW to your Ethernet network.
2. On a Windows PC, open the Control Panel and double-click on Network Connections. Right-click
on the Network Connection associated with your network adapter and select Properties:
12 UMSLMODGW-1006