Table of Contents
Advertisement
This will show the Local Area Connection Properties Dialog:
3. Select the Internet
Properties dialog as shown below:
4. Write down your current settings so they can be restored later.
5. Select Use the following IP address and configure a static IP address in the same subnet as the
device, for example 192.168.1.1 and the subnet mask 255.255.255.0. Click OK to save the changes.
6. Start Internet Explorer.
7. In the address box, type 192.168.1.130 and then press Enter.
8. Click Configuration... and then Ethernet & IP in the menu on the left side of the page.
9. Enter the IP address, subnet mask, and gateway address assigned to your SL-MOD-GW, then click Save.
10. Restore your computer's original settings.
UMSLMODGW-1006
Protocol
(TCP/IP) entry and click on Properties to open the TCP/IP
13
Advertisement
Table of Contents
