Shutdown; Cleaning; Preventative Maintenance; Warranty Repairs - Keating Of Chicago MG-2 Manual

If the pilot or burner fails to stay lit, wait fi ve
minutes before attempting to relight to allow any
accumulated gas to escape.
3. For hot plates with constant pilots, rotate the red
knob counter clockwise to the desired setting. For
hot plates with spark ignitors, rotate the red knob
clockwise to the desired setting after the burner
ignites.
NOTE: The left knob operates the back burner and the
right knob operates the front burner.

SHUTDOWN

1. Rotate the red knob fully clockwise for each
burner.

CLEANING

When cleaning your hot plate, use Keating Klenzer, the
fi nest dry stainless steel polish available, to restore
your hot plate's exterior to it original luster.
For hot plates with optional spark ignitors, dis-
connect the electrical power source before doing
any cleaning.

WARRANTY REPAIRS

Keating's warranty begins with the date of installation.
In the event that your Hot Plate, under warranty, needs
repairs other than routine maintenance or clean-
ing, you are required to contact Keating of Chicago
(at 1-800-KEATING) before calling a local service
company.
PREVENTIVE MAINTENANCE
Preventive maintenance should be done in daily,
weekly, monthly and yearly intervals as necessary.
Following preventive maintenance procedures will help
keep your hot plate working effi ciently. Proper care
and servicing will lead to years of quality performance.
PREVENTATIVE MAINTENANCE CHART
TIME FRAME
AT LEAST • Check controls.
DAILY*
• Drain and clean drip pan.
AT LEAST • Clean hot plate
WEEKLY*
TIME FRAME QUALIFIED SERVICE PERSONNEL
AT LEAST • Disassemble hot plate to clean
YEARLY* burners and orifi ces.
*High production facilities should be checked more often.
Contact the factory or a local service company to perform
maintenance and repairs.
GAS HOT PLATE
OPERATOR/OWNER
1-800-KEATING
| 5