Konica Minolta magicolor 2550 User Manual page 58

44
SUBNET
MASK
ENABLE
HTTP
ENABLE
AUTO
IP
IPX/SPX FRAME
TYPE
ETHER NAME
TALK
NAME2
Setting
0.0.0.0
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
Setting
YES/NO
Specify whether or not HTTP is used.
If is selected, the Web page pro-
YES
vided to the printer by the built-in HTTP
server is enabled.
If is selected, the Web page cannot
NO
be used.
Setting
YES/NO
Select whether or not the IP address is
automatically acquired when DHCP/
BOOTP and PING, ARP are not function-
ing or when there is no response. If
selected, the IP address is not automati-
cally acquired. If
YES
address is automatically acquired.
If Auto IP is enabled and DHCP/
BOOTP and PING/ARP are disabled,
the printer/network will try to get an
automatic IP address from the network
it is connected to.
Settings
AUTO/802.2/802.3/
ETHER II/SNAP
Specify the protocol used with NetWare.
Settings
magicolor 2550
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
Settings
-
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
Configuration Menu Overview
is
NO
is selected, the IP