On-Screen Displays And Data Code - Canon FS400 Quick Manual

On-Screen Displays and Data Code

You can turn most on-screen displays on or off.
Operating modes:
Repeatedly press
following sequence:
, mode:
• All displays on
• Most displays off*
mode:
• All displays on
• Data code only
• All displays off
DISP.
* Pressing will turn off most of the icons and displays that appears automat-
ically but will not remove onscreen displays that were turned on manually (for
example, onscreen markers or the joystick guide).
About the Data Code
With every scene or photo recorded, the camcorder keeps a data
code (date/time of recording, information about the camera setup,
etc.). In mode, the recording date and time are displayed on the
bottom bar; in
played with the
Š
66
Video
DISP.
to turn the on-screen displays on/off in the
mode, you can select the information to be dis-
[Data Code] setting.