Canon FS400 Quick Manual page 156

- A memory card error occurred. The camcorder cannot record or display the image. Try
removing and reinserting the memory card, or use a different memory card.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory
card ( 32).
- If after the message disappears,
camcorder and remove and reinsert the memory card. If
resume recording/playback. If the problem persists, save your recordings (
tialize the memory card (
Could not add the scene(s) to the playlist
- One or more scenes could not be added to the playlist. The playlist can contain a maximum
of 99 scenes. Delete some scenes from the playlist (
Do not disconnect the USB cable or the power source until you safely end the connection
from the computer. Cannot write data with this connection. To write data to the camcorder,
connect the compact power adapter then reconnect the camcorder and computer.
- The camcorder cannot be operated while it is not being powered by the compact power
adapter and is connected to a computer with the supplied USB cable. In addition, scenes
cannot be written back and music files cannot be transferred to the camcorder. To avoid cor-
rupting the data in the camcorder's memory, use the computer's Safely Remove Hardware
function to end the connection and disconnect the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, use the com-
puter's Safely Remove Hardware function to end the connection, disconnect the USB cable,
power the camcorder using the compact power adapter and only then connect it to the com-
puter again.
Do not disconnect the USB cable or the power source until you safely end the connection
from the computer. Connect the compact power adapter
- When the camcorder is in
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the cam-
corder. Use the computer's Safely Remove Hardware function to end the connection and dis-
connect the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, power the cam-
corder using the compact power adapter and only then connect it to the computer using the
supplied USB cable.
File name error
- The folder and file numbers have reached their maximum value. Set
bering] to [Reset] and delete all the photos on the memory card (
( 35).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initial-
ize the memory with this camcorder (
Š
110
Additional Information
appears in red, perform the following: Turn off the
35).
mode and is connected to the computer with the supplied
35).
turns back to green you can
83) and ini-
68).
[Photo Num-
76) or initialize it