Canon FS400 Quick Manual page 159

To use this function, switch out of
- You pressed a button that cannot be used in
to flexible recording mode.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of pho-
tos on the memory card to fewer than 2,500 photos (Windows) or 1,000 photos (Mac OS).
Disconnect the USB cable, and restore the connection after a short while.
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Unable to recognize the data
- You transferred data to the camcorder recorded using a video configuration that is not sup-
ported (PAL or SECAM).
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
using the [Complete Initialization] option (
mode
mode. Press
35).
Additional Information
to set the camcorder
83) and initialize the memory
Š
113