Glass Assembly - Heatilator ECO-ADV-PS35 Owner's Manual

F. Glass Replacement
WARNING
• Glass is 5mm thick high temperature heat-
resistant ceramic glass.
• DO NOT REPLACE with any other material.
• Alternate material may shatter and cause
injury.
1. Open the door from the appliance by lifting door off of
hinge pins and lay on a fl at surface face down.
2. Using a Phillips Head screw driver, remove the 4 brackets
and set aside. Figure 22.1.
3. Remove old glass and replace with the new glass.
4. Re-install the brackets using the same screws.
4
Remove the 4
brackets outlined
in the diagram
Figure 22.1
22

Glass Assembly

1
2
3
7058-142L • May 29, 2014