6.14
Replacing the front direction indicators
Requirements:
•
Phillips screwdriver.
•
Remove the seat.
•
Remove motor cover.
•
Separate battery cable.
•
3-wheel version
•
Remove direction indicator screw (1).
•
Disconnect direction indicator cable (2) from
wiring harness. Plug is located behind rear
steering column cladding (see chapter
entitled "Replacing steering column").
•
Replace direction indicator.
•
Reassembly of the direction indicators takes
place in reverse order
•
Check functions.
•
4-wheel version
•
Remove steering column cladding and
steering column (see chapter entitled
"Replacing steering column").
•
Remove chassis bolts and fold chassis
upwards.
•
Remove direction indicator screw (1) on
chassis.
•
Disconnect direction indicator cable (2) from
wiring harness.
•
Remove screws (3) on indicator glass.
•
Remove indicator glass.
•
Loosen screws (4) on orange-coloured cap
(5) and remove cap.
•
Replace lightbulb.
•
Reassembly of the direction indicators takes
place in reverse order
•
Check functions.
41