Airflow through the ventilation openings should be Before using your Stewart Audio Inc. Power Amplifier, please read this unobstructed. Owner’s Manual carefully to ensure optimum trouble-free perform- ance.
2.2.2 Universal-Mount Installation ··································· 7 1.1 Features 2.2.3 Product Dimensions ··············································· 8 Your Stewart Audio AV Series amplifier is the result of years of 2.3 Proper Cooling Considerations ············································ 8 experience in the design and manufacture of quality amplifiers. As such 2.4 Input Connections ·······························································...
2.2.1 Universal-Mount Installation 2 Setup The AV30MX-2 also has a universal bracket available which allows the 2.1 Setup Precautions unit to be mounted against a wall or under a table. Two screws are included in the kit which will affix the bracket to the top or the side of the unit.
Channel 1 will accept a stereo 3.5mm jack while Channel 2 will accept stereo RCA phono plugs. Both inputs should be stereo, unbalanced, and line-level. The AV30MX-2 does not 1.25in include a pre-amplifier. Refer to the next section on the proper wiring 3.2cm...
2.5.1 Speaker Configuration Stewart Audio recommends using high-quality, heavy-gauge speaker The AV30MX-2’s two stereo input channels are mixed and then sent wire and connectors to send the output signal of your amplifier to the speakers. Use the following table as a guideline when selecting your out to the left and right speakers.
UL 2043 Plenum Rated Level Input 2 Input 1 NOTE: Stewart Audio will not be held responsible for L Speaker R damage to your AV30MX-2 or connected equipment if Mute + - + the instructions in this manual are not followed.
3.2.2 Controls lit. All AV30MX-2 controls are located on the rear of the unit. There is no Procedure: Check that level controls are not turned down. Check that power switch so the AV30MX-2 will turn on whenever power is sup- input and output connections are secure.
This section includes the return procedures which must be followed in Depth 3.2in (8.1cm) order to prevent processing delay or cost to the customer. Please read Weight 0.37bs (0.16kg) the entire section before contacting Stewart Audio for returns. Stewart Audio reserves the rate to change features and specifications without notice.
2. Do not ship any accessories (manuals, cords, hardware, etc.) with your unit. These items are not needed to service your product. If Stewart Audio is unable to contact the sender in 14 days, the mer- Stewart Audio will not be held responsible for these items if they chandise will be considered scrap and may be disposed of.
7 Accessories The following accessories are available from Stewart Audio for your amplifier. All part numbers shown are Stewart Audio Part Numbers. Mounting Brackets AV-POLE Pole-mount bracket for AV Series amplifiers AV-BRACKET Universal mounting bracket for AV Series amplifiers Connection Adapters ADPT-RCA Mono Female RCA to male Euroblock.
Need help?
Do you have a question about the AV30MX-2 and is the answer not in the manual?
Questions and answers