Stewart Audio World Series Features & Specifications

Stewart Audio World Series Features & Specifications

World series professional power amplifier

Advertisement

World Series
Professional Power Amplifi er
The Stewart Audio World 2.1 Professional Power Amplifi er
is designed specifi cally for the unique requirements of
high quality commercial, industrial and Pro Audio sound
installations. The World 2.1 produces sound which is
smooth and uncolored, while offering a full detailed low
end response with lots of horsepower. The high-frequency
switch mode power supply and Class H amplifi er design
adapt to the demands placed upon them, enabling the
amplifi er to run with maximum effi ciency regardless of the
load impedance. With incredible effi ciency, up to 4 World
2.1's can typically run on one standard 20 amp circuit.
Weighing in at just 17 lbs and occupying two standard rack
spaces, the World 2.1 is the perfect balance of power and
sonic performance.
14397 Cuesta Court Ste D1 • Sonora, CA 95370 • TEL: 209.588.8111 • www.stewartaudio.com
World 2.1
650W x 2 @ 4 Ohms
400W x 2 @ 8 Ohms
1800W x 1 @ 4 Ohms bridged
1300W x 1 @ 8 Ohms bridged

Features:

Two channel amplifi er, optimized to
drive 4 Ohm and 8 Ohm loads.
Variable speed fan
Clean full–range dynamic power
Bridgeable
Ultra effi cient switch mode power supply
3 Years parts and labor warranty
Made in the USA

Applications:

Sound Reinforcement
Pre/Post Productions
Music and Paging Systems
High Quality Distributed Sound Systems
Fixed Installations
Instrument Rigs
UL Certifi cation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the World Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Stewart Audio World Series

  • Page 1 1800W x 1 @ 4 Ohms bridged 1300W x 1 @ 8 Ohms bridged Features: The Stewart Audio World 2.1 Professional Power Amplifi er • Two channel amplifi er, optimized to is designed specifi cally for the unique requirements of drive 4 Ohm and 8 Ohm loads.
  • Page 2 15.3” (38.9) deep. The World 2.1 shall weigh amplifi er shall have a class H output stage and a high–speed 17 lbs (7.7 kg). The amplifi er shall be designated the Stewart Switch Mode Power Supply. Non Switch Mode Power Supplies Audio Model World 2.1...

This manual is also suitable for:

World 2.1

Table of Contents