Cradlepoint IBR600 Product Manual page 204

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
How to Send an SMS Message
You can send SMS messages to the router via phone or email. The key elements are:
1. the modem's MDN
2. the SMS password (defined above)
3. the command
You must know the MDN (Mobile Directory Number) of the modem to send SMS messages to the router. This is a phone
number that can be found under Status → Internet Connections in the router administration pages (or under Devices →
Network Interfaces in Enterprise Cloud Manager).
How to Text from a Phone
1. Open the text messaging tool on your phone and start a new message.
2. In the To field, enter the modem's MDN.
3. In the Subject field, enter the SMS password and command.
4. Click Send.
How to Text from an Email
NOTE: There are limitations with sending texts via email. The SMS engine is currently only compatible with GSM-based carrier operators.
1. Start a new email message.
2. In the To field, enter the modem's MDN plus the modem's carrier domain name (e.g.,
3. Enter the password and command in either the Subject field or Body of the email message. If you use the subject
field, leave the body blank, and if you use the body, leave the subject blank.
NOTE: The subject field may be limited to a certain number of characters, so if you get an error when sending the command on the subject line,
switch to using the body instead.)
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
2085555555@txt.att.net).
FOR MORE HELP AND RESOURCES PAGE 201