Cradlepoint IBR600 Product Manual page 109

COR | USER MANUAL Firmware ver. 5.0.0
CRADLEPOINT
Wired 802.1X:
This allows you to configure an authentication server that will accept authentication requests from devices attached to
wired Ethernet ports. IEEE 802.1X defines the encapsulations of the Extensible Authentication Protocol (EAP).
Click Enable 802.1X to require IEEE 802.1X authorization for the Ethernet ports associated with this network.
Reauthentication Period: EAP re-authentication period in seconds.
Authentication settings
• Auth Server IP Address: This is the IP address
of the connected RADIUS server.
• Auth Server MAC Address: This is the
hardware address of the connected RADIUS
server's interface.
NOTE: If you don't know the MAC address for the
RADIUS server, enter 00:00:00:00:00:00 and the service
will try to find the MAC address from the given IP address.
• Port: 1812 is common for the authentication
port.
• Password: Assigned by the RADIUS server.
Accounting settings: Most of the accounting settings
often match the authentication settings, depending on
whether the RADIUS server is the same for both
authentication and accounting.
• Acct Server IP Address
• Acct Server MAC Address
• Port: 1813 is common for the accounting port.
• Password
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 106