Phone Number Preset - Kenwood DNX9960 Instruction Manual

Hands Free Unit Control
4 Display voice registration screen
5 Say the phone category to register
(1st try)
Say within 2 seconds after the Beep.
6 Say the phone category to register
(2nd try)
Say within 2 seconds after the Beep.
7 End voice registration
⁄
• A message is displayed if the voice is not
recognized. Read the message for the further
operation.
• Repeat from 1st try if the voice is different from
the 1st try.
68 DNX series DNX9960/ DNX7160/ DNX7020EX

Phone Number Preset

Registers frequently used phone number
to Hands Free control screen preset button.
1 Display the Hands-Free Control
screen
See <Making a Call> (page 60).
2 Select the Preset number to register
2 sec.
⁄
• If no Preset number is registered, pressing
this button momentarily moves to the
step 3.
3 Select the search destination of the
number to register
[ ] Registers from SMS received
message list.
[ ] Registers from SMS sent message
list.
[ ] Registers from Phonebook.
[ ] Registers from outgoing calls list.
[ ] Registers from incoming calls list.
[ ] Registers from missed calls list.
[Direct Number] Registers by entering
phone numbers.
[Voice] Registers voice for voice
recognition to preset number. (DNX7/