How To Read This Manual - Kenwood DNX9960 Instruction Manual

How to read this manual

This manual uses illustrations to explain its
operations.
The displays and panels shown in this
manual are examples used to provide
clear explanations of the operations.
For this reason, they may be different
from the actual displays or panels
used, or some display patterns may be
different.
Selecting a screen item
Select and choose an item on the
screen.
Select the item by touching the button
on the screen.
Short Press
Press Pre ss the the bu butto tton, n, , , denote den
Change in the screen
With each operation, the screen
changes in the order shown here.
∞ : Continues to the next line.
¶ : Ends here.
Continue to the next page
The instruction continues to the next
page.
Make sure to flip the page for the rest
of the instruction.
10 DNX series DNX9960/ DNX7160/ DNX7020EX
oted by y y y y y . .
Source Control Screen
Switches to the source control screen to
use various playback functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 27).
2 Operation on the Source Control
screen
3 3 3 1 1 1
[38] Plays or pauses.
Audio File Audio File
Dragging [38] left or right changes the
playing position.
Multi Function
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
2 sec.
Continue to touch until the memory
number appears.
The above operation example with the mark
differs from the actual operation.
2 2 2
Next page 3