Screen Control - Kenwood DNX9960 Instruction Manual

To register your original color
1 Start the RGB coordinate
2 Adjust each color value
1 1 1
1 Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
3 Select a Preset number to register
Adjusted color is registered to the
selected Preset button.
4 Complete the color coordination
DDX series DDX896/ DDX8046BT
2 sec.

Screen Control

You can adjust the screen mode of the
monitor.
1 Display the Screen Control screen
> >
Touch [ ] [
[Screen Control]. (page 78)
2 Set each item
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
( "ON")
"ON": The display dims.
"OFF": The display doesn't dim.
"SYNC": Turning the Dimmer function
On or Off when the vehicle light
control switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer
function On or Off according to the
Navigation Day/Night display setting.
(DNX series and DDX series with
navigation unit only)
⁄
• In this Screen Control screen, you can perform
setups for the menu screen. Setups for videos
such as DVD can be performed on the <Screen
Control> (page 58).
> > > >
] [Display]
Next page 3 Next page 3
English 87