Gateway M405 User Manual page 147

To use a projector or external monitor:
1
Turn off your notebook.
2
Plug the projector or monitor cable into the VGA port on your notebook
or port replicator. For the location of the VGA port, see
and "Back" on page
3
Turn on your notebook.
4
Plug the projector's or monitor's power cord into an AC power source and
turn it on. Windows recognizes the new hardware and searches for its
driver. You may need to install the driver from the disc supplied by the
projector's or monitor's manufacturer or download the driver from the
manufacturer's Web site.
5
After the driver is installed, right-click any empty space on the desktop,
then click
Properties
6
Click the
Settings
7
Right-click the second monitor icon (labeled 2), then click
8
Click .
Apply
9
Adjust properties such as
Viewing the display on a projector or monitor
248.
. The Display Properties dialog box opens.
tab.
Screen Resolution
www.gateway.com
"Back" on page 6
Attached
or if necessary.
Color Quality
.
137