Advertisement
Quick Links
Advertisement
Related Manuals for Ledj Spectra Batten
Summary of Contents for Ledj Spectra Batten
- Page 1 Spectra Batten (Order code: LEDJ95)
-
Page 2: Safety Instructions
LEDJ Spectra Batten Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintenance of this... -
Page 3: Operating Determinations
LEDJ Spectra Batten Safety IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections with particular caution! •... -
Page 4: Operation
Sound activated mode: Runs sound activated using the built-in microphone Built-in programmes mode: With the LEDJ indoor Spectra Batten, yon can select 13 different Programmes. Press the “SETUP” and “UP” and “DOWN” buttons to select the programmes (from PG00 to PG12) and select the PG- - desired programme value. - Page 5 09C.h. P3C.h. button the LCD display will show: , this selects which DMX mode the Spectra Batten is being run in. You can select any of these 3 DMX modes by using the “UP” and “DOWN” buttons. DMX Values 03CH...
- Page 6 Slave Mode: SlA- To activate the Slave Mode, press the “MODE” button to show , this will now run the Spectra batten in slave mode. Sound Mode: SO.31 To activate the Sound Mode, press the “MODE” button to select , now the sound mode is activated it will run one step at a time, you can adjust the sensitivity by using the “UP”...
- Page 7 LEDJ Spectra Batten DMX Set Up Notice: • Be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing.
- Page 8 LEDJ Spectra Batten Specifications Spectra Batten Specifications: LEDS: R:108, G:72, B: 72 (total: 252) High intensity 10mm LEDs Beam angle: 40 degrees 3 pin female XLR socket and 3 pin male XLR socket 3 pin XLR Power in and power out...