Kenwood VR-506 Instruction Manual page 7

c
TITLE
-I c-
0 Numeric keys
-Qx!
If CD or MD is selected as the input source,
these keys function as numeric
keys If tuner
is selected as the input source, these keys
are used to call up station presets
8 SET UP key
-Es
Use to select the speakers' settings etc
MENU key
Use to operate other components
0 SOUND key
-m
Use to adjust the sound quality and ambi-
ence effects
OSD key
Use to operate other components
0 MULTI CONTROL keys
-m
Use to control a variety of settings
P CALL m/m keys
-a
If tuner is selected as the input source, these
keys function as P CALL keys
m/HI keys
If CD or MD is selected as the input source,
these keys function as skip keys
Q TUNING rrlw keys
If tuner is selected as the input source, these
keys function as tuning keys
If CD, MD or TAPE is selected as the input
source, these keys function as search keys
0 BASS BOOST key
-m
Use to select the maximum adjustment set-
ting for the low frequency range
0 DISC SKIP key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key
Al0 key
If TAPE is selected as the input source, this
(A and B) of a double cassette deck
+l 00 key
Usetoselect thedisc numberwith the multi-
CD player
Q INPUT SELECTOR keys (DVD, PHONO/
AUX, CDIDVD, TUNER, MD/TAPE,
VIDEOl, VIDE02)
-ES
Use to select the input sources
HI DVD m keys
Use to return to the operation of the receiver
@ TITLE key
When in DVD player operations, these keys
function as skip keys
0 MUTE key
-I22
Use to temporarily mute the sound
@ POWER (~/a) key
-EQ
Use to turn the receiver on and off
@ DVD POWER key
-m
Used to operate DVD player
For details, refer to the instruction manual of
your DVD player (Press the DVD POWER
key for more than 2 seconds )
@ RECEIVER key
Use to operate other components
@ LISTEN MODE key
Use to select the listening mode
RETURN key
Use to operate other components
Q ENTER key
-m
Use to operate other components
4 key
If tape is selected as the input source, this key
functions as the play key for side B of the
cassette (the side facing away from the front of
the deck)
@ BAND key
-a
Use to select the broadcast band
t/u key
If CD is selected as the input source, this key
functions as the play/pause key
If MD or TAPE is selected as the input source,
this key functions as the play key
@ II key
Use to operate other components
@ AUTO key
Use to select the auto tuning mode
n
key
Use to switch the status of CINEMA EQ
DISC SEL key
IfCD,MDorTAPEisselectedastheinputsource,
this key functions as the stop key
@ CINE EQ key
Use to operate other components
@ VOLUME keys
Use to adjust the receiver volume