Kenwood VR-506 Instruction Manual page 24

Preseffing radio sfafiun~ manually
__ ^.
- - I -. " -. ."
MULTI CONTROL
n Tune to the station you want to store
q
Press the MEMORY key white receiving the station
Blinks for 5 seconds
Lights for 5 seconds
Proceed to step gi within 5 seconds
(If more than 5 seconds elapse, press the MEMORY key again)
a Use the MULTI CONTROL keys to select one of the station
presets (1 - 40).
q
Press the MEMORY key again to confirm the setting
l
Repeat steps@ a, a, andatostoreasmanystationsasnecessary
l
If you store a station at a previously used preset, the old station will
be replaced by the new one
Receiving presef stations
-.-2 -
-
-
RC-R0511
RC-R0615rnO617
fl Press TUNER to select tuner as the source
a fn;;tt;F,mber of the preset station you want to receive
u
Press the numeric keys in the following order:
For "15", press
For "20", press
l
If you make a mistake entering a two digit number, press the +I 0 key
repeatedly to return to the original display and start again
Recei@g preset sfqfions in order (p. CALL)
R&R0511
RC-R0615lR0617
0 Press TUNER key to select the tuner as the source
q
Use the P CALL H/HI key to select the desired station
l
Each time you press the key, another preset station is received in
order
Pressing the P CALL w does the following:
01+02+03+ - 38-r39+40
Pressing the P CALL m does the following:
r 01+02+03+ .- 38+39+-407
Holding down the m or w key, lets you skip through the
presets, receiving each preset station at 0 5 second intervals