Display Dimmer Adjustment - Kenwood VR-506 Instruction Manual

When watching movies at night you might not be able to raise the volume
as loud as normal Midnight mode compresses the dynamic range of
previously specified parts of the Dolby Digital sound track (like scenes with
sudden increases in volume) to minimize the difference in volume between
the specified and non-specified parts This makes it easy to hear all of the
sound track, even when listening at low volumes
0 Press the SOUND key repeatedly until "NIGHT" appears on the
display
l
This can be selected only if CD/DVD, DVD O/R-505/KRF-V5550D
only) or VIDEO2 is selected as the source and the listen mode is set
to "DOLBY DIGITAL "
0 Use the MULTI CONTROL keys to select the ON or OFF setting
l
The adjustment item is displayed for approximately 8 seconds
l
Some Dolby Digital software may not be compatible with the Mid-
night mode
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display You might find this useful if you darken your room to watch movies
or listen to music
Each time you press the DIMMER key, the display brightness
changes among the three available settings Select the bright-
ness level you find most pleasing
i76iHz
i
PiXt pliyback
The receiver is compatible with the 96kHz LPCM playback To play a
96kHz DVD, set the listen mode to "STEREO"
l
When "96kHz" appears in the display, press the LISTEN MODE key
(the listen mode changes to the STEREO mode)