Kenwood VR-506 Instruction Manual page 27

The DTS compatible models can reproduce a CD, DVD, or LD carrying
the DTS mark
DOLBY DIGITAL can be used when playing DVD or LD software bearing
the mm markand DOLBY DIGITAL format digital broadcasts (etc )
DlslllL
DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing
video, DVD, or LD software bearing the ~~JDDLBYMROUNDJ mark
INPUT MODE INPUT SELECTOR
LISTEN MODE
RC-Fl0511 RC-R061VR0617
Preparations
l
Turn ON related components
l
Complete "Preparing for surround sound" (speaker settings) -m
l
Use the INPUT SELECTOR to select the component you wish to play
back with surround sound
l
Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back
-La
l
Noise will be produced when a DTS source is played by selecting the
analog input
E) Start playing the video software
q
Press the LISTEN MODE (LSTN M.) key to select the
listening mode.
The listening mode settings are stored separately for each input If the
input mode,is set to digital auto ("AUTO SOUND" lights), the receiver
selects the optimal listening mode automatically based on the type of
input signal and the speaker settings
Each press of the LISTEN
MODE (LSTN M ) key switches the
setting as listed below
The listening mode settings are different depending on the type
of input signal
When the DOLBY DIGITAL signal is input:
(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up )
c
0 DOLBY DIGITAL: DOLBY DIGITAL surround
0 PRO LOGIC: PRO LOGIC surround (The PRO LOGIC
indicator lights up )
0 3 STEREO: 3-STEREO surround
@I STEREO: Normal stereo playback
When you select DOLBY DIGITAL
When the DTS signal is input:
(The DTS indicator lights up )
[I
0 DTS: DTS surround
@ STEREO: Normal stereo playback
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input:
-I
t 0 PRO LOGIC: PRO LOGIC surround (The PRO LOGIC
indicator lights up )
0 3 STEREO: 3-STEREO surround (The 3 STEREO indica
tor lights up )
@ ARENA: DSP surround
@I JAZZ CLUB: DSP surround
0 THEATER: DSP surround
@ STADIUM: DSP surround
0 DISCO: DSP surround
- @ STEREO: Normal stereo playback Sound is produced
from the two front channels only
l
If a Dolby Digital signal having more channels than the maximum
number of playback channels available using the receiver's current
settings is input, the DOWNMIX indicator on the front panel lights up
and downmixing is performed to match the number of available
channels
fl Adjust the volume.
Notes
l
Depending on thetypeofthesignalorspeakersetting, somelistening
modes cannot be selected
l
When playback is started, the sound may be cut or interrupted before
the input source is conflrmed as Dolby Digital
l
To enjoy Dolby Digital surround (as well as all the other listening
modes) from a single component, be sure to use a Dolby Digital
compatible source component Connect the Dolby Digital compatible
source component's Dolby Digital format digital audio signal to one of
the DIGITAL INPUT jacks on the back of the receiver Connect the
normal audio signal correctly to the respective component's
AUDIO
jacks
-&Q-m-m-a