Status Displays - Siemens SIMATIC IPC627C Getting Started

2.4

Status displays

PROFINET status display
PROFINET status display
Display
SF PROFINET
(optional)
Virtual status displays
The two "virtual" CP 1616 LEDs can only be seen in the SIMATIC software and can be scanned via
SNMP.
PROFINET
SIMATIC IPC627C
Getting Started, 09/2011, A5E02669077-03
Meaning
Status display for
CP 1616 onboard
Virtual LEDs
LED Description
OFF
CP not available

CP disabled

No error, communication

established
Download in progress

Slow flashing
Link status error

IO controller: IO device cannot

be addressed
IO controller: Duplicate IP

address
Fast flashing Exception error: Diagnostics via
Web or SNMP no longer possible
AN
Diagnostic information

available
No communication

established.
RUN CP is active
STOP CP is in the stop state
Flashes There are no "slow flashing" or
"fast flashing" states.
Description
2.4 Status displays
15