Initial Startup - Siemens SIMATIC Rack PC IL 40 Getting Started

Intel pentium 4 platform, first steps in commissioning
Table of Contents

Advertisement

Commissioning
2.4

Initial Startup

The Rack PC IL is delivered without any operating system installed. The operating
system is contained on the supplied Restore CD ROM.
The Rack PC IL is currently approved for the following operating systems:
Windows NT 4.0; German, English
Windows 2000 Professional MUI;
German, English, French, Italian, Spanish
Windows XP Professional MUI;
German, English, French, Italian, Spanish
During the installation, the partitions c:\prog with 4 Gbytes (or 10 Gbytes for
Windows XP) and d:\data with the remaining memory capacity are created on
the hard disk drive.
Note
You require the corresponding LAN boot support in the BIOS if you want to boot
the device from the network. PXE support is implemented in the BIOS during
delivery. If you require BOOTP support, you have to install it first. You will find
the tool for it in the "Rack PC IL 40 Documentation and Drivers" CD supplied.
Installing the Operating System from Restore CD
After switching on, the Rack PC IL will perform a self test. During the self test, the
message <F2> BIOS Setup, <F12> Boot Menu appears briefly.
Notice
The keys F2 and F12 can be used to recall the displayed menus while the
message is displayed. Only press the keys if you are familiarized with the menus
to be recalled.
The Rack PC IL is booted. The message Operating system not found
appears on the screen to indicate that no operating system has been installed yet.
1. Insert the supplied Restore CD into the CD ROM drive and close it.
Notice
If two CD drives are installed, the CD in has to be placed in the first drive (master).
2. Press twice the On/Off button behind the front door. The Rack PC IL is
rebooted and the recovery menu appears.
3. If you select "Full Recovery", the hard disk will be overwritten completely. If you
select "Partial Recovery", the data on "D" (Partition DATA) will be retained.
Always select "Full Recovery" for the first commissioning.
"Partial Recovery" can only be used for reinstallation if the partition name and,
if applicable, the partition size are not changed.
2-6
SIMATIC Rack PC IL 40, Getting Started
A5E00171493-02

Advertisement

Table of Contents
loading

Table of Contents