Table of Contents
Advertisement
To switch ECM mode on/off
ECM (Error Correction Mode) is a system
for correcting errors caused by
interference on the line. When switched on,
the display shows E when sending or
receiving to/from another machine using
ECM. The default setting for your machine
is to have ECM switched ON and you
should not have to change it. However, you
can switch it off if you wish.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows ECM: ON
Press to switch between ON and OFF.
Press to confirm the option displayed.
To return to standby.
43
Polling
Polling lets you call another fax machine to retrieve
a document automatically.
It also enables another fax machine to call your
PaperJet 65E and request a document that you have
set ready to be received.
This is often also known as 'faxback'.
To poll a document from another fax
machine
When you know that another fax machine
has a document ready for polling, you can
set your PaperJet 65E to receive the
document.
Press until the display shows POLLING RX
Press until the display shows TYPE TIME
Either
Enter the time you want to start calling the
/
other fax machine then press Start.
Or
Press the Start button to begin polling
immediately. Display shows TYPE FAX
NUMBER
Dial the number of the fax machine from
/
which you want to poll a document.
Press to confirm. Display shows POLL RX
and the time at which you have set it to poll.
You can still send and receive other faxes as
normal.
Advertisement
Table of Contents
