Table Of Contents; Contents; Note The Following Before Starting - Husqvarna 325RJ Operator's Manual

Contents

KEY TO SYMBOLS
Symbols .......................................................................
CONTENTS
Contents ......................................................................
Note the following before starting: ................................
SAFETY INSTRUCTIONS
Personal protective equipment .....................................
Machine s safety equipment ........................................
Checking, maintaining and servicing the machine s
safety equipment ..........................................................
Cutting equipment ........................................................
General safety precautions ..........................................
General working instructions .......................................
Basic working techniques ............................................
WHAT IS WHAT?
What is what on the trimmer? ......................................
ASSEMBLY
Fitting the J-handle .....................................................
Fitting blades and trimmer heads .................................
Fitting a trimmer guard and Superauto II trimmer head
Fitting the blade guard/combination guard, grass blade
and grass cutter ...........................................................
Fitting other guards and cutting attachments ...............
FUEL HANDLING
Fuel ..............................................................................
Fuelling ........................................................................
STARTING AND STOPPING
Check before starting ...................................................
Starting and stopping ...................................................
MAINTENANCE
Carburettor ...................................................................
Muffler ..........................................................................
Cooling system ............................................................
Spark plug ....................................................................
Air filter .........................................................................
Bevel gear ....................................................................
Maintenance schedule .................................................
TECHNICAL DATA
Technical data ..............................................................
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS .....
CONTENTS

Note the following before starting:

Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
2
design and appearance of products without prior notice.
3
Maintenance, replacement, or repair of the emission control
devices and system may be performed by any nonroad
3
engine repair establishment or individual.
4
WARNING! Under no circumstances may the
4
!
design of the machine be modified without
the permission of the manufacturer. Always
6
use genuine accessories. Non-authorized
8
modifications and/or accessories can result
8
in serious personal injury or the death of the
10
operator or others.
10
Your warranty may not cover damage or
liability caused by the use of non-authorized
12
accessories or replacement parts.
13
WARNING! A clearing saw, brushcutter or
13
!
trimmer can be dangerous if used
13
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
14
others. It is extremely important that you
14
read and understand the contents of this
operator's manual.
15
15
16
16
18
19
Canada
20
20
20
HUSQVARNA AB HUSKVARNA SWEDEN
IMPORTANT ENGINE INFORMATION
21
THIS ENGINE CONFORMS TO U.S.
21
FOR SMALL NON - ROAD ENGINES.
REFER TO OPERATOR`S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
22
This label certify that the product has been certified in
accordance with American exhaust requirements EPA 1.
23
USA
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet Federal
emissions requirements. Category C = 50 hours, B = 125
hours, and A = 300 hours.
For customer assistance call: 704-921-7000 or contact us at
our website: www.husqvarna.com
TWC
EP A PH1
- 3
English