Troubleshooting - Black & Decker HG1500 Instruction Manual

ENGLISH
Problem
• Unit will not start.

TROUBLESHOOTING

Passible cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
22
Possible solution
• Plug tool into a working outlet.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black&Decker
service center or authorized
servicer.)
• Reset circuit breaker.
(If the product repeatedly causes
the circuit breaker to trip,
discontinue use immediately and
have it serviced at a Black&Decker
service center or authorized
servicer.)
• Have cord or switch replaced at
Black&Decker Service Center or
Authorized Servicer.